Czy-8sb viscosity tester developed and produced by Labthink blue light is a laboratory viscosity test instrument which meets the requirements of Pharmacopoeia and is specially used for the viscosity test of medical patches, plasters and other products.

Working principle and technical parameters of viscosity tester for medical patch detection

Executive standard of viscosity tester for medical patch detection: Chinese Pharmacopoeia (2015 Edition)

The working principle of the adhesiveness tester for medical patch detection is as follows

The test plate with adhesive sample is vertically hung on the test frame, and the weight with specified weight is hung at the lower end. The displacement of the sample after a certain period of time or the time when the sample completely detaches is used to characterize the ability of the adhesive sample to resist pulling off.

The technical parameters of the adhesion tester for medical patch detection are as follows:

Standard roller: 2000g ± 50g

Weight: 1000g ± 10g (including the weight of loading plate)

Test plate C: 125mm (L) × 125mm (W) × 1.7mm (d) (16 pieces)

Timing range: 0-9999 hours, 59 minutes and 59 seconds

Test station: 8

Dimension: 900mm (L) × 315mm (W) × 544mm (H)

Power supply: 220 VAC ± 10% 50 Hz / 120 VAC ± 10% 60 Hz

Net weight: 25kg

Leave a Reply

Your email address will not be published. Required fields are marked *