Lm3102 / – q1simpleswtcher synchronous rectifier buck converter has all the functions needed to achieve high efficiency, cost-effective buck regulator. The device can provide 2.5A current and output voltage as low as 0.8V for the load. Dual n-channel synchronous MOSFET switches can reduce the number of components, thus reducing the circuit complexity and minimizing the size of the circuit board.

The lm3102 / – Q1 is different from most other cot regulators in that it does not rely on the output capacitor ESR for stability and is designed to work perfectly with ceramic capacitors and other output capacitors with very low ESR. Without loop compensation, the device can provide fast load transient response and realize simple circuit. Due to the inverse relationship between the input voltage and the on-time, the operating frequency of the device remains almost constant when the line changes. Through external programming, the working frequency can be as high as 1MHz.

Protection functions include VCC undervoltage locking (UVLO), output overvoltage protection, thermal shutdown and gate driven UVLO. The lm3102 / – Q1 adopts heat-resistant enhanced htssop-20 package, while the lm3102 can also adopt chip size ball gate array (dsbga) thin chip level package to reduce the output current.

Performance characteristics and application range of lm3102 / - Q1 synchronous rectification buck converter

characteristic:

Lm3102-q1 is an automotive grade product meeting aec-q1001 standard (operating junction temperature range is – 40 ° C to + 125 ° C)

Low number of components and small solution size

It is stable when using ceramic capacitors and other low equivalent series resistance (ESR)

No loop compensation is required

High efficiency can be achieved under light load conditions by intermittent conduction mode (DCM) operation

Pre bias start

Ultra fast transient response

Programmable soft start

Programmable switching frequency up to 1MHz

Valley current limit

Output overvoltage protection

Precision internal reference enables adjustable output voltage as low as 0.8V

Thermal shutdown

Main technical specifications

The input voltage range is 4.5V to 42V

2.5A output current

0.8V, ± 1.5% reference

Integrated dual N-channel metal oxide semiconductor field effect transistor (MOSFET) (main MOSFET and synchronous MOSFET)

Heat resistant enhanced thin small form factor package with heat sink (htssop) – 20 package

Application:

5 VDC, 12 VDC, 24 VDC, 12 VAC and 24 VAC systems

Embedded system and industrial control

Automotive Telematics and body electronics

Load point regulator

storage system

Broadband infrastructure

Direct buck conversion of 2, 3 and 4 lithium battery systems

Editor in charge: GT

Leave a Reply

Your email address will not be published. Required fields are marked *