Humidity is closely related to our life. People will feel uncomfortable if the humidity is too high or too low. In addition to the impact of humidity on us, the humidity of the air still has a great impact on the working effect of the machine in the work of the machine. Siemens is a brand with mature manufacturing technology of humidity sensor, and many consumers choose it.

Siemens brand introduction

Founded in 1847, Siemens AG is a leading enterprise in the field of electronic and electrical engineering in the world. Siemens has been in China since 1872. For more than 140 years, it has unremittingly provided comprehensive support for China’s development with innovative technology, excellent solutions and products, and established a leading position in the Chinese market with outstanding quality, reliable reliability, leading technological achievements and unremitting pursuit of innovation. In fiscal year 2015 (from October 1, 2014 to September 30, 2015), Siemens’ total revenue in China reached € 6.94 billion, with more than 32000 employees. Siemens has become an integral part of China’s society and economy, and is dedicated to working with China to achieve sustainable development.

Installation requirements of Siemens humidity sensor

For water supply temperature control:

On the heating loop: if the water pump is installed on the water supply pipe, the sensor is directly installed behind the water pump; If the water pump is installed on the return pipe, the sensor is installed 1.5 ~ 2 m behind the mixing valve

For return water temperature limit:

The sensor shall be installed on the return pipe that can accurately collect the limited temperature. The sensor shall be installed at the pipe elbow so that the insertion rod or protective sleeve is directly facing the water flow direction.

The sensor must be installed at the place where the water is completely mixed, downstream of the pump, or at least 1.5m away from the water mixing place if the pump is installed at the return water.

When installing the sensor, the wires must not enter from the top. For all types of sensors, the minimum insertion length shall not be less than 60 mm. The sensor cannot be covered by insulation. Before installing the sensor, the threaded fitting or T-piece G ½ Must be welded to the pipe.

Application of Siemens humidity sensor

Like measuring weight and temperature, the selection of humidity sensor must first determine the measurement range. Except for meteorological and scientific research departments, those engaged in temperature and humidity measurement and control generally do not need full humidity range (0-100% RH) measurement. In today’s information age, sensor technology is closely combined with computer technology and automatic control technology. The purpose of measurement is to control, and the measurement range and control range are collectively referred to as the use range. Of course, for those who do not need to engage in measurement and control system, it is OK to directly select the general-purpose hygrometer.

The above is the installation precautions and application scope of Siemens humidity sensor introduced by comfort 100. Although the name of humidity sensor sounds very common, it still contains many high-tech technologies that are not used in our daily life. As a long-standing brand of electronic and electrical appliances, Siemens has also done very well in the field of humidity sensors.

Leave a Reply

Your email address will not be published. Required fields are marked *