Seamless LCD splicing screen is a common large screen display terminal product, which is mainly used in offices, conference rooms, exhibition halls, command centers and other occasions. So, next, I will introduce four installation methods of seamless LCD splicing screen:
Embedded installation: the embedded installation method is generally used in the office, conference room and exhibition hall, and when the number of splicing units is small, it is installed on the concave surface of the wall, and then wrapped, so that the large screen and the wall presents an integrated visual effect, with a more beautiful installation effect.
Wall mounted installation: wall mounted installation is a common method, which has the advantages of fast installation, low cost, less space, and beautiful appearance. However, it needs to be built on the basis of bearing wall, and the safety factor should be considered. Generally, it is used when the number of splicing units is not very large.
Bracket installation: the bracket installation method not only has a better load-bearing effect, the installation column is a hardware slide, which can realize the adjustment of the panel and internal organization at any height; it improves the work efficiency of the installation and maintenance process, but it can be slightly poor in aesthetics.
Cabinet type installation: TV wall cabinet type is a kind of high-end atmosphere, with strong structure and strong expression. It adopts high-quality cold-rolled steel plate, laser cutting, CNC cutting, stamping, bending, robot welding, which is more popular in government units and command centers.
When installing seamless LCD splicing screen, we often recommend suitable installation methods according to the specific installation environment, such as wall mounted, cabinet mounted, welding bracket, double-layer aluminum profile, etc. each installation method also has its characteristics and requirements. For example, the wall mounted type should be less than 9 screens to facilitate later disassembly and maintenance, while the cabinet mounted type is convenient, but it needs to reserve maintenance space In the narrow space, if the wall is not a solid wall, the floor support can be welded, and the maintenance and installation before installation can be added.
In some cases, in order to make the wall and the seamless LCD splicing screen completely in a horizontal plane, it is necessary to embed the seamless LCD splicing screen into the wall. How to install this kind of screen and what aspects should we pay attention to?
Embedded installation is mostly used in the exhibition hall or conference room, in order to save in-depth installation space and visual effect. Generally, in order to use embedded installation, we need to design the size of seamless LCD splicing screen first, calculate according to the splicing number, and then reserve the length and width in advance, and need to reserve more 2 cm space on the upper, lower, left and right sides, so as to facilitate the later technology After the installation, the extra part can be covered by the decoration strip, which does not affect the overall effect.
In the embedded installation, the way to fix the seamless LCD splicing screen is generally double-layer bracket, because it is more firm. Fix the bracket on the side of the wall through the expansion screw, and then fix the screen. At this time, we need to pay attention to the accurate calculation of the depth before and after, so as to keep the screen and the wall in the same horizontal line, because according to the size and seam The thickness of the panel is not the same, and the whole LCD splicing large screen or bare screen (the difference between seamless LCD splicing screen and bare screen), which is also related to the thickness of the whole screen, and we need to communicate with the technical personnel of the relevant LCD splicing manufacturers in detail before installation.
Considering the maintenance and repair, if it can be maintained at the back of the wall, it can be maintained from the back. If not, it needs to install the front maintenance bracket to facilitate the later maintenance. In addition, we need to consider the layout and trend of signal wire and other wires, and design them in advance to avoid damaging the decoration and aesthetics.