These AC/DC current probes provide enough performance to support 50MHz measurement system bandwidth. TCP0020 and TCP2020 provide a maximum range of 20ARMS, and TCP202A provides a maximum range of 15ADC+peak AC. These probes also provide perfect current accuracy down to 10m, which is critical to meet today’s challenging current measurement needs.

Key Features and Benefits:

• Easy-to-use, accurate AC/DC current measurements

•DC->50MHz bandwidth

• Jaw diameter 5mm (0.2 inches)

•Accurately measure current down to 10m per grid

•High accuracy, DC gain error is generally less than 1%

• Split core structure, easy to connect circuits

• Low noise and DC drift

•TCP0020

—20ARMS maximum current function

—100A peak pulse current function

—TekVPI probe interface for direct connection to oscilloscope

– Automatic determination of display units and readings on the oscilloscope display

—Single-button degaussing and auto-zero control, easy to use

—Easy access to the probe menu displayed by the oscilloscope, providing probe setup control and working status information

—Remote control function via TekVPI oscilloscope

•TCP2020

—20ARMS maximum current function

—100A peak pulse current function

—10mA/mV sensitivity

—BNC ​​output for connection to most oscilloscopes and other measurement equipment (requires >100kΩ termination)

– Degauss button and thumbwheel to adjust DC bias

– Powered by AC adapter

•TCP202A

—15ADC+peak AC maximum current function

—50A peak pulse current function

—TekProbe interface, directly connected to the oscilloscope

– Automatic determination of display units and readings on the oscilloscope display

– Degauss button and thumbwheel to adjust DC bias

• Safety certified

application:

•power supply

•Semiconductor device

• Inverter/Converter

• Electronic ballast

• Industrial/Consumer Electronics

• Mobile communications

• Motor drive

• Transportation system

Responsible editor: gt

Leave a Reply

Your email address will not be published.