Features and Application Scope of E3N 100A AC/DC Current Clamp

The E3N is a 100A (peak) current clamp with BNC output terminals for accurate measurement of AC or DC current waveforms. The output voltage signal mV proportional to the measured current is directly displayed by the oscilloscope. A three-position slide switch on the handle panel selects range and ON/OFF. Features: • Can measure very thin […]

Read More

Features, Advantages and Application Scope of AC/DC Current Probes

These AC/DC current probes provide enough performance to support 50MHz measurement system bandwidth. TCP0020 and TCP2020 provide a maximum range of 20ARMS, and TCP202A provides a maximum range of 15ADC+peak AC. These probes also provide perfect current accuracy down to 10m, which is critical to meet today’s challenging current measurement needs. Key Features and Benefits: […]

Read More

Analysis of technical parameters and characteristics of CM 605 hook meter

Features: • 10,000 count LCD display – excellent resolution • 100A AC/DC dual range measurement (10A range resolution is 1mA) • Tapered jaws for areas with heavy wiring (jaws open 0.60″-15mm) (conductor diameter 0.45″-12mm) • 600V AC/DC Voltmeter • Analog AAC/DC outputs can be used for data logging • Autoranging & ADC both have autoranging […]

Read More

MFA-R Series Active Magnetic Field Probes

Extremely small probes for direct measurement of high frequency magnetic fields on modules such as IC pins, tiny conductors or around the smallest packaged SMD devices! Due to the continuous improvement of integrated circuit integration and clock rate, there are a large number of stray magnetic fields and stray currents on the PCB, which are […]

Read More

Features and Applications of 920 Series Low Capacitance Passive Probes

The PicoConnect900 series of low aggression, high frequency passive probes are designed for microwave and Gigabit Ethernet up to 9GHz and 18Gb/s. They offer unprecedented performance and flexibility at a super low price. These monitoring probes utilize a unique (patented) in-PCB construction for ultra-low capacitance, co-planar microwave integrity, rugged reliability and a very low price. […]

Read More

HZ540 is the feature and application of active near-field probe kit

The HZ540 is an active near-field probe kit designed to provide diagnostic assistance when addressing radiation problems. These kits consist of three or five different hand-held probes, respectively. They have different sensitivities and reception characteristics and can be used with various spectrum analyzers, EMI receivers or oscilloscopes. These probes facilitate quick identification of signal sources. […]

Read More

The composition and performance characteristics of EMC-SET2 preconditioning test kit

The EMC preconditioning test kit contains all necessary instruments and software to measure typical EMI problems, including spectrum analyzer HMS-X (with HMS-EMC and HMS-3G options), power supply impedance stabilization network HM6050-2D, HZ540 probe kit and HM Explorer software. HMS-X Spectrum Analyzer Unit ·Frequency range: 100kHz~1.6GHz/3GHz Spectral purity: better than -100dBc/Hz (at 100kHz) Scanning: 20ms~1000s Detection: […]

Read More

Features and application advantages of TS-EMF portable directional antenna

TS-EMF antennas are used for accurate electromagnetic field strength measurements, especially for field strength coverage tests and electromagnetic environment assessments. Whether it is for communications regulators, the Environmental Protection Agency, or for the installation and commissioning of mobile operators, broadcasters, power operators, and wireless equipment, TS-EMF is indispensable. TS-EMF is composed of three groups of […]

Read More