1、 Background of the theme of “safe campus”

In view of the recent period, some parts of the country have occurred a number of cases of harmful effects on students. The homicide in Hepu County, Guangxi, the case of injuring students in Leizhou, Guangdong, the case of injuring students in Shandong, and the murder in Nanping, Fujian, in particular, resulted in the death of 8 children and the injury of 5 children. After the case, the central leadership attached great importance to it and gave important instructions in a timely manner. Deploy to strengthen the campus security work, the leaders of the party and government around the country become the person in charge of the campus security, and raise the campus security to a new height.

To this end, Shanghai Aolin Information Technology Co., Ltd. takes the construction of “safe campus” as the theme, responds to the national spirit of “strengthening the security construction of the surrounding environment of the school, especially strengthening the monitoring of the students at the school gate when they go to school and finish school”, abandons the simple way of “swipe card” attendance in the past, and adopts the current advanced “ZigBee” wireless transmission technology, It completely solves the problems of large flow, fast movement and data transmission when students enter and leave the campus, and provides a practical management system for safe campus.

2、 Application status of “home school connection – Ping’an SMS” management system

At present, in the school management system, there are three main ways for readers to read and identify the RF card: short distance manual card swiping, long distance passive identification and long distance active identification. In system integration, this is a very important problem, because the choice of recognition mode will directly affect the reading rate and convenience of the system.

The short-range manual swipe card mode is mainly aimed at the application of high-frequency and low-frequency reading devices (such as bus card, access card, etc.) in the past. Because the reading range is about 20cm away from the reader, the person wearing the RF card must come forward to the reader to be read. Although this method can guarantee 100% reading rate and low cost, because it needs to scan one by one, the school gate will be crowded in the peak period of school and after school, which is easy to cause safety accidents. At present, this way of working is almost completely eliminated.

Long distance passive identification mainly uses UHF (433M, 868m, 915m, etc.) reading equipment and passive RF card. Its reading range can reach about 10 meters, which can solve the problem of scanning one by one in short distance manual card swiping mode. Some well-designed devices can support up to 50 RF cards reading at the same time, which can greatly increase the speed of personnel, without queuing in and out of the school gate. But there are still many application problems in this way. First, the passive RF card can not be covered by the human body and metal objects, which requires that students can’t back to the reader antenna position when entering and leaving school, and the RF card can’t be close to the human body and placed in the schoolbag; second, the passive RF card can’t be placed with metal objects; third, personnel can’t go in and out with large flow. These defects cause that this technology was not used in the field of home school communication in the past.

3、 Active 2.4G identification system adopted by Aolin company

Remote active recognition (mainly 2.4-2.48g frequency band) is the most successful and popular recognition method in schools all over the world. This kind of identification method is not only very far away, and can easily read within 50 meters (80 meters in the air), but also can support up to 200 RF cards to read at the same time. The most important thing is that it can overcome the occlusion of human body, schoolbag and so on. Even if hundreds of students enter and leave together, it still guarantees 100% reading.

The basic application principle of Aolin’s ZigBee Based Automatic Identification Technology in the home school communication system is roughly as follows: each student carries a wireless induction ID card (which can be used as an electronic student card). After arriving at the school gate, the two base stations near the school gate will read the identification and transmit the information to the data center server. After the server processes the identification, the SP service provider will send the information to the data center server Send a short message to the students’ parents’ mobile phones, such as “Dad, I’m safe at school” “Dad, I’m out of school, I’ll go home soon”. At the same time, all the students’ in and out information will be saved in the server, and it will be sorted into a report for the school and parents to inquire. By using the home school interactive network platform, the head teacher can send each student’s learning and living conditions to the parents’ mobile phones and e-mails at fixed or irregular times, which can avoid all kinds of communication barriers caused by teachers’ notice one by one or parents’ absence from the parents’ meeting. It is convenient and fast, and has become a bridge between teachers and parents, which is widely popular.

Application and implementation of home school communication management system based on ZigBee recognition technology

Editor in charge: GT

Leave a Reply

Your email address will not be published. Required fields are marked *